Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They do not get rotten or rusty like aluminum and timber.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and may even be fatal. It is essential to make sure that your windows are in good working order.

Single-pane windows are relatively simple to replace and generally fit into old frames very easily. If you have double-paned windows that are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you plan to try to remove the window panes by yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric, not onto the floor and could be trampled under.

After the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional comes out and repair the window. This also serves as an obstacle to stop criminals from getting into your home. If the gap is large, you might want to consider using the security door with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they are susceptible to a range of issues, including sliding. A window that is sagging can cause problems with light, draughts or even security. It's important to take action as soon as you discover that your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window which is sagging. To accomplish this, you'll need to open the window so that you can get to the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to check the fit after you have repositioned your hinges. If you're happy with the fit, you can tighten the screws to ensure that they remain in place.

If you are unable to reposition the hinges, you might require replacing the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is essential to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

upvc window repairs near me handles can also loosen up. The majority of the time this is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need to shut the window and then perform a test fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is crucial to act if you get up each morning to find mouldy walls and floors that are wet. Water leaks from windows not only lead to the destruction of your home's structure but also hamper your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any skilled DIYer. Depending on how serious the problem is, the old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk and then make the area more difficult to clean and decrease the efficiency of your energy usage.

Check that any drainage holes have no debris inside them and ensure that the sill pan has been properly angled to drain away from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to note that if the leak is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it opens in the breeze. They can be repaired by any skilled DIYer and are usually completed in just a few minutes.

Most households in the UK will have either top hung or side hung upvc window repair (My Site) windows that use hinges and like any mechanical part they can wear down over time. It is very easy to change a window hinge however it is easier if someone else helps you to hold the frame.

Make sure that the uPVC hinges open and close in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The issue could be caused by opening the window improperly or by a poor installation at the factory. Sending us a picture through our website can often resolve the problem. We are happy to give assistance.

It is also important to grease the hinges regularly. Applying a light engineering lubricant to the hinges is a good method of doing this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the chance of windows sticking and prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent-based lubricants should not be used since they can damage your upvc window repair near me windows.

5. Draughts

Draughts can be caused by different factors. The hinges can also become misaligned due to wear, which can cause an opening between the frame and sash. They can be fixed by giving them a good clean, but when they're beyond repair, it could be necessary to have them realigned or replaced. The interlock, which is located on the hinge side of the window and can also be misaligned, and again it's feasible to give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. Installing high-quality weatherstripping can help stop draughts. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce the risk of draughts.

Lastly, one of the most effective methods to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes filled with some sort of filler and can be put on the top of your windowsill. These will keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it could be cheaper to replace them than to repair them. If you are experiencing issues with your window repairs near me made of upvc, it's best to consult an expert as soon as you can.